LED Pattern¶
This section of the getting started, defines how the LED pattern blinks for different scenario for the sensor, hub and source.
Sensor LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
White Solid |
Startup |
Hemisphere detection |
White Blink (1Hz) |
Cant startup |
Sign detection error |
Magnetometer distorted, move to different location |
||
Red -> Yellow -> Green Solid |
Tracking |
Sensor change color depending on field quality |
Blue blink (100ms on/100ms off) |
No hub communication |
Out of range, no hub connected, bad signal |
Blue blink (25ms on/25ms off) |
Firmware update |
Sending firmware update |
Cyan Solid |
Full charge |
|
Cyan sawtooth (4Hz) |
Charging (Battery critical) |
|
Cyan sawtooth (2Hz) |
Charging (Battery low) |
|
Cyan sawtooth (1Hz) |
Charging (Battery Almost full) |
|
Cyan Blink (1Hz) |
Battery Low |
|
Cyan Blink (4Hz) |
Battery Critical |
Hub LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
Blue Solid |
Is hub |
|
Blue blink (25ms on/25ms off) |
Firmware update |
Sending firmware update |
Cyan Blink (4Hz) |
Battery Critical |
Source LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
White Solid |
Startup |
Boost converter, crosstalk calibration, frequency calibration, tune current |
Green Solid |
Normal source |
Everything is running |
Blue Solid |
Source as hub |
|
White Blink 1Hz |
Magnetometer distorted |
Move to different location, to much metal |
Blue blink (100ms on/100ms off) |
No hub communication |
Out of range, no hub connected, bad signal |
Blue blink (25ms on/25ms off) |
Firmware update |
Sending firmware update |
Bootloader LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
Green blink (5Hz) |
Bootloader started |
Waiting for USB package, otherwise jumping to application |
Green blink (10Hz) |
Bootloader received USB |
Received USB package, stays in bootloader until restart |
Advanced LED Pattern¶
This section explain the advanced LED pattern, which can be enabled through parameter: Advanced LED pattern.
Sensor LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
White Blink (1Hz) |
Startup |
Sign detection / No tracking |
White Blink (3Hz) |
Startup |
Hemisphere Detection |
Magenta Blink 1Hz |
Magnetometer distorted |
Move to different location, to much metal |
Red -> Yellow -> Green Solid |
Tracking |
Sensor change color depending on field quality |
Blue blink (100ms on/100ms off) |
No hub communication |
Out of range, no hub connected, bad signal |
Blue blink (25ms on/25ms off) |
Package from PC |
|
Cyan Solid |
Full charge |
|
Cyan sawtooth (4Hz) |
Charging (Battery critical) |
|
Cyan sawtooth (2Hz) |
Charging (Battery low) |
|
Cyan sawtooth (1Hz) |
Charging (Battery Almost full) |
|
Cyan Blink (1Hz) |
Battery Low |
|
Cyan Blink (4Hz) |
Battery Critical |
Hub LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
Green blink (5Hz) |
Bootloader started |
Waiting for USB package, otherwise jumping to application |
Green blink (10Hz) |
Bootloader received USB |
Received USB package, stays in bootloader until restart |
Source LED pattern¶
Color |
Feature |
Comments |
|---|---|---|
White Solid |
Startup |
Boost converter, crosstalk calibration, frequency calibration, tune current |
Green Solid |
Normal source |
Everything is running |
Blue Solid |
Source as hub |
|
Magenta Blink 1Hz |
Magnetometer distorted |
Move to different location, to much metal |
Blue blink (100ms on/100ms off) |
No hub communication |
Out of range, no hub connected, bad signal |
Blue blink (25ms on/25ms off) |
Package from PC |