Firmware Update Guide to Version 3.2

Introduction

This is a 2 step guide on how to firmware update your AMFITRACK devices, and then do a calibration of the devices, to get the auto startup feature to work.

Step-by-Step Instructions

Step 1: Follow the Firmware update guide

This guide can be found here: Firmware Update guide

Step 2: Prepare Your Device

When the firmware update has been successful for all the devices (Hub/Source/Sensor).

Then a calibration is needed to be done.

Turn on all the devices, and place them in an area with no metal, or atleast as little as possible.

Step 3: Update AMFITRACK Viewer to newest version

Make sure the latest version of the AMFITRACK Viewer is downloaded. (Atleast Version 5.3)

The AMFITRACK Viewer can be downloaded here: Download Amfitrack Viewer

Step 4: Follow the guide build into the AMFITRACK Viewer

Open the AMFITRACK Viewer.

In the top left corner click the hamburger menu.

Click “Run custom script”

Make sure you have selected “AmfitrackPLLCalibration” in “Select executable”

No args are needed for this custom script.

Press “Run”

Wait until a new window pop up.

Then follow the guide in the new window

Step 5: AMFITRACK PLL Calibration script

To calibrate all your devices, select “Calibrate an AMFITRACK source and AMFITRACK sensors”

If source is already calibrated use: “Calibrate AMFITRACK Sensors”

Step 6: Done

Your sensors is now ready to be used, and the auto startup features is working.